Compressor from tire cooler

Compressor technology is becoming increasingly popular and in demand, because it makes a variety of modifications and sizes. The power of compressed air is widely used in workshops, factories and plants. Home masters also do not bypass this theme. Self-made compressor installations based on a regular compressor from a refrigerator are far from new. To get equipment close to professional equipment from them, they are modernized, complementing them with various auxiliary elements - sensors, relays, pressure gauges, receivers, etc. However, most often stop on the budget options, the one we want to offer to your attention today. Compressor from the refrigerator for pumping tires

The principle of the compressor compressor from the refrigerator

The regular compressor from the refrigerator is a compressor unit without a storage tank, which is enclosed in a metal case.Two copper tubes run away from it, through which air is sucked inwards and outwards under pressure. The electrical connection scheme does not change as it is ready. Air filters are installed on inlet and outlet pipes, followed by an oxygen hose with an adapter for the consumer.
Refrigerator compressor for tire inflation

Resources for compressor assembly

Materials:
  • Compressor from the refrigerator;
  • Connection cable with plug;
  • Automobile air filter - 2 pcs;
  • Oxygen hose for connections ;
  • Spiral oxygen hose with quick-disconnect adapters;
  • Air gun for pumping wheels;
  • Clamps, wires.
Tool:knife, screwdriver, pliers.

We assemble a compressor installation

The compressor from the refrigerator is supplied with a starting relay to That was originally a thermostat. He is not involved in this assembly, so it must be turned off by first marking the contacts on the starting relay, and short-circuited with an insulated wire.
Compressor fromrefrigerator for tire inflation
 Compressor from tire inflator
We select the oxygen hose according to the diameter of the nozzle and install an air filter at the compressor inlet. One its plastic air inlets can be cut off, leaving a free hole. In the connection, you can do without clamps, as this element of our installation is not under pressure.
Compressor from tire cooler
It is not worth doing a long branch pipe for it. Cut it off with a knife and put the filter by hand. To allow the copper tubes of the compressor they were not on the same line, and did not interfere with each other, they can be bent in different directions.
 Compressor from the tire inflation refrigerator
 Compressor from the tire inflation refrigerator
 Compressor from the refrigerator for tire inflation
 Compressor from the tire inflator
With the second one, attach the second air filter to the outlet.If necessary, the copper pipe under it can be shortened with nippers.
Compressor from the refrigerator for tire inflation
Compressor from the refrigerator for tire inflation
Compressor from a refrigerator for tire inflation
As the practice of the author himself has shown, even with a relatively small pressure, such an assembly cannot do without pressure clamps. We put them on the pipes, and tighten the connection. The second author, coming out of the compressor, covered the copper pipe with a self-tapping screw and tape.
Compressor from the refrigerator for tire inflation
Compressor from the refrigerator for tire inflation
Compressor from the refrigerator for tire inflation
Compressor from the tire inflator
Attach a small piece of oxygen hose to the air filter, and connect a spiral hose for compressor work. This can be done through the quick-detachable adapter.
Compressor from the refrigerator for tire inflation
Compressor from the refrigerator for pumping tires
Now you can connect an air pistol to the spiral hose to pump the wheels, and check the operation of our installation. To avoid excessive pressure in the hoses and the filter, you can compress the trigger air pistol nylon tie.
Compressor from the refrigerator for pumping tires
Compressor from the refrigerator for pumping tires As you can see, the author of the homemade managed to get working pressure of about 3 Atm, which is quite enough for the operational pumping of wheels in the garage. By the way, this installation can be used for the most diverse works, for example, for painting with an airbrush.
Compressor from the refrigerator for pumping tires
Compressor from the refrigerator for tire inflation
Compressor from the refrigerator for pumping tires
Compressor from the tire inflation pump

Conclusion

The weak point of this compressor installation is plastic air filters. With a pressure of several atmospheres, their body inflates strongly, and they can simply burst. Therefore, this option of their use is conditional and not final. The installation itself is completely trustworthy and the closest attention from not only motorists, but also just those who love to do handicrafts.

Related news


How to open a dry cleaner
What coats look cheap
Husband - cad and tyrant: why women endure violence
Kendrick Lamar Receives Pulitzer Prize
Hard Disk - Last Chance