How to restore the heated glass

You will need
  • - conductive adhesive with stencils.
If the test results in a positive result, then later, during a visual inspection of the glass, a section in which there is a break in the heating circuit is detected.
Having determined the location of the repair, a protective film is removed from the stencil that comes with the glue tube, and it is glued to the glass so that the damaged section of the chain is in the center of the stencil slot.
Conductive adhesive is applied in two steps:
1. The required amount of glue is squeezed into the slot of the stencil and mixed there;
2. a minute after the application of the first one, the second layer is applied, but no longer mixes, but is simply applied on top.

Related news

Calico wedding anniversary
How to make a cake out of candy
Breakfast beloved with your own hands
Cold porcelain do it yourself
Decorative braid in new fashion collections
My house is my fortress. Material for construction
Executive office - saving on buying