Gilt from a bill

We are all accustomed to, that in the form of pigs represent piggy banks, in which money is scrupulously put. If you want to save a certain amount for the purchase of the thing you need, then a piggy bank will definitely help. But you have to wait. In the same lesson, a slightly different version is proposed. We suggest you make money out of money. We are talking about crafts made in the technique of mangami. You must use the bill to fold the figures. The piggy of money is a talisman that will surely bring financial luck and well-being. Consider the method of its implementation. To create a manigami pig, you will need one bill.

How to fold the pig in the origami technique in stages

1. Take any bill of your choice and rotate it horizontally.
Gilt from the bill
2. Start the bend along the middle, smooth out perfectly and take care to close adjacent corners and opposite long sides.
Gilt from the bill
3. Bend the paper and fold it again.Make a second bend vertically, combining the corners and short sides of a rectangular bill adjacent to the long sides.
Gilt from the bill
4. Leave the bill in this position and lift the top layer up so that the bottom side is aligned with the left side where the bend was. You select a line offset by about 1 cm from the diagonal of the figure you are looking for.
Gilt from the bill
5. Fold the upper part, which stands for the borders, towards yourself to combine with the upper side of the figure.
Gilt from the bill
6. Turn the blank over to the other side and fold the left side to yourself, retreating by about 1 cm. You must also align the line.
Gilt from the bill
7. Expand the paper, but now you have a bill in front of you, in which the two sides are bent in opposite directions, and you can also see 3 fold lines.
Gilt from the bill
8. The left side rush to the center line of the fold and smooth out the paper.
Gilt from the bill
9.Turn the blank over to the other side.
Gilt from the bill
10. Now, holding the banknote in this position, bend it vertically in half.
Gilt from the bill
11. Begin to disassemble the bill, but not to the end. In the center make a small fold, as shown in the corresponding photo.
Gilt from the bill
12. Hold the bill with your finger and bend the workpiece along in half.
Gilt from the bill
13. Mash again and rush the two sides to the center line, but the fold should remain in place.
Gilt from the bill
14. Leave the left side bent towards the center, and bend the right half so that isosceles triangles are formed on the sides. At this stage you will get a detail resembling a flashlight.
Gilt from the bill
15. Turn the figure over to the other side.
Gilt from the bill
16. Work now with the square part of the workpiece.The upper right corners bend so as to close them in the center, then spread only a small corner in different directions.
div>

Related news


Bottle Vase
Insects Pictures for Kids
Why do not you like to go in for sports and what to do about it
Characteristics of a man-Aries on the sign of the zodiac: lighter, match, spark
How to choose gate automatics
Salad with crackers - simple and tasty recipes with photos - with chicken, beans, smoked sausage, cheese and kukurzy. Royal Crab Salad with Crackers
Feeding the females