Sports do-it-yourself nod

On the shelves of fishery sports shops, there are nods to suit every taste: from different materials, different designs and for a wide range of mormysk masses. However, professional athletes do their own nods on their own. Really they have no opportunity to get a company nod? It's not about the greed of fishermen-athletes. The right homemade nod is indeed better than the brand. Before the nod in the mormyshming there are two main tasks:
  • - creating the right game;
  • - highly informative and sensitive to bites .
To cope with this task can only nod with perfect ogruzkoy. A sign of a classically correct load is a bend in the form of an arc with an angle of 90 degrees with a vertical position of the nod. It is obvious that the bend of the nod should correspond to the weight of the mormyshka. And the universal nod from the store can not provide such a bend. You need to pick up a nod for a specific weight of the jig. Choose the perfect nod for weights 0.12; 0.15; 0.18; 0.2; 0.26; 0.32 grams in the store is simply impossible. The maximum that will succeed is to choose three nods for the entire range.For some scales they will be underloaded, for others they will be overloaded. It's for creating the perfect balance that the athletes make the nod by hand.

Making a nod

To make a sports nod you will need a special material yourself. The best material is polyester. You can buy it in the form of a film, but you can find a product from which you can cut a strip.
Sports do-it-yourself nod
X-ray film is a classic example of a suitable Dacron. You can also use pads from a computer keyboard or old floppy disks. Personally, I prefer the X-ray film. First, cut off the strip of the desired width from the common cloth. I use nods 6-7 cm long, this is the average length range. There are athletes who take long nods of 8-9 cm, and there are, on the contrary, short 4-5 cm. This is a matter of taste. For a nod, you need a trapezoidal strip with a lower base of 4-5 mm, the upper one 1.5-2 mm. Conventional X-ray film has a thickness of 0.16 mm and requires grinding.
Do-It-Yourself Sports Nod
Sports do-it-yourself nod
Grinding should not be done evenly, but creating a taper in thickness. It is convenient to grind the film with a scalpel, if not, then with ordinary emery paper. The clerical knife is not suitable for such work. A nod is grinded from both sides. After preliminary preparation of the nod, a hole for the fishing line should be made at its end. It is not recommended to make a hole with a hot needle, as it strongly melts the film. It is possible to make a hole without heating, and to edge out it with sandpaper. A sport nod with one's own hands
A sport nod with one's own hands
A sport nod with one's own hands
Do-It-Yourself Sports Nod
Hanging up the boat to make a perfect bend. The main part of the work is done. The tip of the nod is painted with a permanent marker so that a bite can be seen.If the rod has a factory connector, then it inserts a manufactured nod. If there is no connector, it should be made by yourself. This will require a sheath of wire or cambric, which will serve as the basis of the connector and heat shrink tube, which serves as the outer sheath. The kembrik is chosen so that its diameter coincides with the diameter of the whip. A lavsan blank is glued to the cambric, which is fixed on top with a heat shrink tubing. It remains to make a hole for passing the fishing line and the sports nod is ready.

Related news


Male orgasm
The easiest 1.5 V to 220 V inverter
Open garden gazebo
Why do men love oral sex
How to Transform Sleeves: Ideas for Decor or Restoration